Already a member? Sign in or create an account

Cart

Product Quantity  

Your cart is empty.

View cart
  1. Home page
  2. Catalog
  3. Machine safety equipment
  4. Electromechanical machine safety equipment
  5. Electronic machine safety sensors

RSS 36-I2-D-R-ST Electronic machine safety sensor

RSS 36-I2-D-R-ST
Repeated individual coding with RFID technology
Coding level "High" according to ISO 14119
1 x connector socket M12, 8-pole
Actuation from side
Thermoplastic enclosure
RFID-technology for needs-based protection against tampering
Misaligned actuation possible
27 mm x 108.2 mm x 35 mm
High repeat accuracy of the switching points
2 short-circuit proof PNP safety outputs
Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
  • SKU
    4030661413396
  • Manufacturer code
    101214773
  • Current, Residual current, Fail-safe output, maximum
    0.5 mA
  • Current, Rated operating current
    600 mA
  • Current, Rated operating current, Safe digital outputs
    250 mA
  • Current, output current, fail-safe output, maximum
    0.25 A
  • Current, Utilisation category DC-12, Fail-safe digital output
    0.25 A
  • Current, Utilisation category DC-13, Fail-safe digital output
    0.25 A
  • Type of Execution, Housing construction form
    Block
  • Type of Execution, Terminals, mechanical
    not flush
  • Type of Execution, IP Protection class, General
    IP67
    IP65
    IP69
  • Type of Execution, Overvoltage category VDE 0100
    3
  • Type of Execution, Overvoltage category IEC/EN 60664-1
    III
  • Type of Execution, Protection class (Operating resource)
    3
  • Type of execution, sensor, topology
    Sensor for series wiring
  • Type of execution, switching output, fail-safe output, electric
    short-circuit proof, p-type
  • Distance, Hysteresis, Mechanical, maximum
    2 mm
  • Distance, Repeat accuracy R R
    0.5 mm
  • Length, Sensor
    22 mm
  • Area, ensured switch distance OFF Sar
    20 mm
  • Area, ensured switch distance ON Sao
    10 mm
  • Range, switch distance S, typical
    12 mm
  • Electrical data, Connector 1, Pin assignment, PIN 1
    1A1 Ue: (1)
  • Electrical data, Connector 1, Pin assignment, PIN 2
    X1 Safety input 1
  • Electrical data, Connector 1, Pin assignment, PIN 3
    A2 GND Blue
  • Electrical data, Connector 1, Pin assignment, PIN 4
    Y1 Safety output 1 Black
  • Elektrische Daten, Absicherung des Diagnoseausganges, Allgemein
    short-circuit proof
  • Elektrische Daten, Absicherung des Sicherheitsausganges, Allgemein
    short-circuit proof
  • Housing material
    Glass-fibre, reinforced thermoplastic
  • Standard, standards
    EN IEC 61508
    EN IEC 60947-5-3
    EN ISO 13849-1
  • Note, General
    Evaluation requirements: dual-channel safety input, suitable
    Teaching of the individual coding of a RST actuator through
  • Note, LED switching conditions display
    LED green: Supply voltage
    LED red: Fault
    LED yellow: Operating condition
  • Number, fail-safe digital outputs
    2
  • PIM maintenance status
    Discharge "Online catalog"
  • PNV, standard, certificates
    cULus
    TÜV
    ECOLAB
    FCC
    IC
    ANATEL
  • Recommendation, actuator
    RST 36-1
    RST 36-1-R
  • Recommended, Safety switchgear
    PROTECT PSC1
    SRB-E-301ST
    SRB-E-201LC
  • Type of electric connection
    Connector M12, 8-pole
  • Review, Resistance to vibrations to EN 60068-2-6
    10 … 55 Hz, amplitude 1 mm
  • Review, restistance to shock
    30 g / 11 ms
  • Safety parameters, Category, EN ISO 13849
    4
  • Safety parameters, Mission time
    20 Year(s)
  • Safety parameter
    EN IEC 61508
    EN ISO 13849-1
  • Performance Level
    e
  • Safety values, PFD value
    0.00000000027 /h
  • Safety parameters, Safety Integrity Level (SIL)
    3
  • SAP, basic quantity unit
    Piece
  • SAP, EAN (European Article Number)
    4030661413396
  • SAP, product group
    Initial
  • SAP, gross weight
    100.000 g
  • SAP, net weight
    100.000 g
  • Included in delivery, number and type, general
    Actuator must be ordered separately.
  • Temperature, Ambient temperature[generated product variant]
    -28 ... +70 °C
  • Temperature, ambient temperature, maximum
    70 °C
  • Temperature, ambient temperature, minimum
    -28 °C
  • Temperature, storage and transport temperature,[generated product variant]
    -28 ... +85 °C
  • Temperature, storage and transport temperature, maximum
    85 °C
  • Temperature, storage and transport temperature, minimum
    -28 °C
  • Time, Duration of risk, maximum
    200 ms
  • Time, Reaction, maximum
    100 ms
  • Tolerance, operating voltage, DC, maximum
    10 %
  • Tolerance, operating voltage, DC, minimum
    -15 %
  • Voltage, voltage drop Ud, maximum
    1 V
  • Voltage, Operating voltage, maximum
    26.4 VDC
  • Voltage, Operating voltage, minimum
    20.4 VDC
  • Voltage, Rated impulse withstand voltage
    0.8 kV
  • Voltage, rated insulation voltage
    32 VDC
  • Voltage, rated operating voltage
    24 VDC −15 % / +10 %
  • Voltage, rated operating voltage
    24 VDC
  • Voltage, type
    DC
  • Voltage, Utilisation category DC-12, Fail-safe digital output
    24 VDC
  • Voltage, Utilisation category DC-13, Fail-safe digital output
    24 VDC
  • Web Type
    Product range
  • Selection (yes/no), cascadable
    Yes
  • Selection (Yes/No), Short-circuit recognition
    Yes
  • Selection (Yes/No), EPLAN
    Yes
  • Selection (Yes/No), Safety functions
    Yes
  • Selection (Yes/No), Integral System Diagnostics, status
    Yes
  • Selection (Yes/No), Short circuit detection
    Yes
  • Selection (Yes/No), Traceparts
    Yes
  • Current, Utilisation category DC-12, Diagnostic output
    0.05 A
  • Current, Utilisation category DC-13, Diagnostic output
    0.05 A
  • Type of execution, switching output, diagnostic output, electric
    short-circuit proof, p-type
  • Electrical data, Connector 1, Pin assignment, PIN 5
    OUT Diagnostic output OUT Grey
  • Electrical data, Utilisation category DC-12, Diagnostic output [generated product variant]
    24 VDC / 0.05 A
  • Number, Semi-conductor outputs with signaling function
    1
  • Voltage, Utilisation category DC-12, Diagnostic output
    24 VDC
  • Voltage, Utilisation category DC-13, Diagnostic output
    24 VDC
  • Coding, Coding level according to EN ISO 14119
    High
  • Electrical data, Connector 1, Pin assignment, PIN 6
    X2 Safety input 2 violet
  • Electrical data, Connector 1, Pin assignment, PIN 7
    Y2 Safety output 2 red
  • Electrical data, Connector 1, Pin assignment, PIN 8
    IN without function Pink
  • Type of application, Actuating panel
    lateral
  • Current, Required rated short-circuit current to EN 60947-5-1
    100 A
  • Type of Execution, Active area
    lateral
  • Height, Sensor
    25 mm
  • Width, Sensor
    106.3 mm
  • Electrical data, current derating with corresponding ambient temperature
    Ambient temperature -25°C … +70°C: ≤ 0.1 A
    Ambient temperature -25°C … +65°C: ≤ 0.25 A
  • Standard, EMC rating
    IEC 60947-3
  • Standard, interfering radiation
    IEC 61000-6-4
  • Note, Distance, Repeat accuracy R
    Axial offset: The long side allows for a maximum height misa
  • Notes, length, sensor chain
    Cable length and cross-section change the voltage drop depen
  • Number, LED's
    3
  • Selection (Yes/No), Diagnostic output
    Yes
  • Note, series connection, sensors
    Unlimited number of devices, oberserve external line fusing,
  • CAD, traceparts, product ID
    69-13042011-105125
  • Voltage, rated operating voltage, maximum
    26.4 VDC
  • Voltage, rated operating voltage, minimum
    20.4 VDC
  • Type of application, Relative humidity, maximum
    93 %
  • Safety parameters, Coding levels according to EN ISO 14119  [generated product range]
    I1 variant: High
    I2 variant: High
    Standard coded v
  • Coding, general information
    Individual coding, multiple teaching
  • Current, consumption, Safety inputs
    5 mA
  • Current, Operating current, minimum
    0.5 mA
  • Current, operation current, serial diagnostic SD[generated product range]
    150 mA
  • Type of Execution, Degree of pollution IEC/EN 60664-1
    3
  • Type of Execution, IP Protection class, General  [generated product range]
    IP65, IP67, IP69
  • Type of Execution, Mechanical life, minimum,
    1000000 Operations
  • Type of execution, mounting
    A screw length of 25 mm is sufficient for sensor mounting an
  • Type of execution, mounting, Screws
    2x M4 (cylinder head screws with washers DIN 125A / form A)
  • Height, permissible installation height above sea level, maximum
    2000 m
  • Electrical data, Classification, ZVEI CB24I: Sink, Safety digital inputs
    C1
  • Electrical data, Classification, ZVEI CB24I: Sink, fail-safe digital outputs
    C1
    C2
  • Electrical data, Classification, ZVEI CB24I: Source, Safety digital inputs
    C1
    C2
    C3
  • Electrical data, Classification, ZVEI CB24I: Source, fail-safe digital outputs
    C2
  • Electrical data, Designation device connection, Diagnostic outputs
    OUT
  • Electrical data, Designation device connection, Safety inputs
    X1 and X2
  • Electrical data, Designation device connection, Safety outputs
    Y1 and Y2
  • Electrical data, Fuse rating, General
    short-circuit proof
  • Electrical data, Fuse rating, Current, maximum
    2 A
  • Electrical data, wiring capacity, serial diagnostic SD, maximum[generated product range]
    50 nF
  • Standard, standards [generated product range]
    EN ISO 13849-1, EN IEC 60947-5-3, EN IEC 61508
  • Note, Mechanical lifetime
    Operations for door weights ≤ 5 kg
    Actuating speed < 0.25 m/s
  • Note, Relative humidity
    non-condensing
    non-icing
  • Note, operating voltage, DC
    stabilised PELV power supply
  • Power, transmit, RFID, maximum
    -6 dB/m
  • Safety values, PFD value
    0.000021
  • Time, frequency band, RFID
    125 kHz
  • Time, Reaction, Actuator, maximum
    100 ms
  • Time, Reaction, Inputs maximum
    0.5 ms
  • Time, Switching frequency, maximum
    1 Hz
  • Time, test pulse duration, maximum
    1 ms
  • Time, test pulse duration, safety, digital output, maximum
    0.3 ms
  • Time, test pulse interval, safety digital input, minimum
    100 ms
  • Time, test pulse interval, safety digital output, typical
    1000 ms
  • Time, Time to readiness, maximum
    2000 ms
  • Torque, tightening torque, screw, mounting[generated product variant]
    2.2 ... 2.5 Nm
  • Torque, tightening torque, screw, mounting, maximum
    2.5 Nm
  • Torque, tightening torque, screw, mounting, minimum
    2.2 Nm
  • Selection (Yes/No), CADENAS
    Yes
  • Selection (Yes/No), Series-wiring
    Yes
  • Force, latching force, approx.
    18 N
  • Selection (Yes/No), latching
    Yes