Possibility to connect up to 4 sensors with non-isolated signals, e.g. the CSS products from Schmersal as well as AOPD’s (only PROTECT-PE-02)
Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
2 safety contacts
Signalling output for each sensor (monitoring of both circuits of the sensors) and and all sensors (Y5, group signal)

SKU

4030661562148
Manufacturer code

101210949
Type of application, Terminal designation

IEC/EN 60947-1
Current, Switching capacity, Relay, (Auxiliary contacts), maximum

0.1 A
Current, Switching capacity, Safe relay outputs, maximum

2 A
Current, Switching capacity, Safe relay outputs, minimum

10 mA
Current, Utilisation category DC-12, Digital output

0.1 A
Current, Utilisation category DC-13, Safe relay outputs

2 A
Type of Execution, Degree of pollution VDE 0110

2
Type of Execution, IP Protection class, Clearance

IP20
Type of Execution, IP Protection class, General

IP20
Type of Execution, IP Protection class, clips or terminals

IP20
Type of Execution, Mechanical life, minimum,

10000000 Operations
Type of execution, mounting

Snaps onto standard DIN rail to EN 60715
Type of Execution, Overvoltage category IEC/EN 60664-1

III
Depth, General

61 mm
Height, General

126 mm
Width, General

65.5 mm
Electrical data, Cable section, maximum

1.5 mm²
Electrical data, Cable section, minimum

0.14 mm²
Electrical data, Conduction resistance, maximum

40 Ω
Electrical data, Contact resistance, maximum

0.1 Ω
Electrical data, Input signal, HIGH Signal "1"

19 - 28,8 VDC
Electrical data, Input signal, LOW Signal "0"

0 - 1 VDC
Electrical data, Input resistance at GND

2900 Ω
Electrical data, Input resistance at U_e

2900 Ω
Housing material

Glass-fibre reinforced thermoplastic, ventilated
Standard, climatic stress

EN 60068-2-78
Standard, EMC rating

EMC-Directive
Standard, standards

EN IEC 60947-5-1
EN ISO 13849-1
EN IEC 61508
EN IEC 60204-1
EN IEC 60947-5-3
EN IEC 62061
EN IEC 60947-5-5
EN IEC 60947-1
Note, contact resistance

in new state
Note, applications

Safety sensor
Guard system
Emergency-Stop button
Pull-wire emergency stop switches
Safety light curtain
Number, Auxiliary contacts

2
9
Number, LED's

6
Number, NC contacts

2
Web, Delivery notice (date until)

2024-12-31
PIM maintenance status

Discharge "Online catalog"
PNV, standard, certificates

cULus
Power, electrical consumption

1.7 W
Type of electric connection

Screw connection, plug-in
Review, Resistance to vibrations to EN 60068-2-6

10...55 Hz, Amplitude 0.35 mm, ± 15 %
Review, restistance to shock

30 g / 11 ms
Safety parameters, Category, EN ISO 13849, Relay outputs

3
Safety parameters, Common Cause Failure (CCF), Relay outputs, minimum

65
Safety parameters, Diagnostic Coverage (DC) Level, Relay outputs

60 %
Safety parameters, Mission time, Relay outputs

20 Year(s)
Safety parameter

EN IEC 61508
EN IEC 60947-5-1
Safety parameters, Performance Level, Relay outputs

d
Safety values, PFH value; Relay outputs

0.0000002 /h
Safety parameters, Safety Integrity Level (SIL), Relais outputs

2
Safety parameters, Stop-Category

0
SAP, basic quantity unit

Piece
SAP, EAN (European Article Number)

4030661562148
SAP, product group

Initial
SAP, gross weight

180.000 g
SAP, net weight

180.000 g
Indication, Operating state, LED

Position relay K3
Position relay K3
Position relay K2
Position relay K1
Internal operating voltage U<sub>i</sub>
Temperature, Ambient temperature[generated product variant]

-25 ... +55 °C
Temperature, ambient temperature, maximum

55 °C
Temperature, ambient temperature, minimum

-25 °C
Temperature, storage and transport temperature,[generated product variant]

-40 ... +85 °C
Temperature, storage and transport temperature, maximum

85 °C
Temperature, storage and transport temperature, minimum

-40 °C
Time, Drop-out delay in case of "emergency stop", maximum

10 ms
Tolerance, operating voltage, DC, maximum

20 %
Tolerance, operating voltage, DC, minimum

-15 %
Voltage, Rated control voltage at DC, maximum

28.8 VDC
Voltage, Rated control voltage at DC, minimum

21.1 VDC
Voltage, Rated impulse withstand voltage

4 kV
Voltage, rated operating voltage

24 VDC -15% / +20%, residual ripple max. 10 %
Voltage, rated operating voltage

24 VDC
Voltage, Switching capacity, Relay (auxiliary contacts), maximum

24 VDC
Voltage, Switching capacity, Safe relay outputs, maximum

24 VAC
Voltage, Switching capacity, Safe relay outputs, minimum

10 VDC
Voltage, type

DC
Voltage, Utilisation category DC-12, Digital output

24 VDC
Voltage, Utilisation category DC-13, Safe relay outputs

24 VDC
Web Type

Product range
Selection (Yes/No), Automatic reset function

Yes
Selection (Yes/No), Earth connection detection

Yes
Selection (Yes/No), Electronic Fuse

Yes
Selection (Yes/No), Integral System Diagnostics, general

Yes
Selection, (Yes/No), Wire breakage detection

Yes
Selection (Yes/No), Removable Terminals

Yes
Number, Signalling outputs

7
Time, Drop-out delay in case of power failure, maximum

60 ms
Time, Pull-in delay at automatic start, maximum, typically

10 ms
Tightening torque, torque, clips

0.6 Nm
Voltage, Rated control voltage at AC 50 Hz, maximum

26.4 VAC
Voltage, Rated control voltage at AC 50 Hz, minimum

21.1 VAC
Voltage, Rated control voltage at AC 60 Hz, maximum

26.4 VAC
Voltage, Rated control voltage at AC 60 Hz, minimum

21.1 VAC